|
PA1000 - HSSI to POS OC-3 / STM-1 |
|
|
|
|
The Metrodata PA1000 converts data from byte-oriented HDLC, as used on Packet over Sonet (POS) interfaces, to bit-oriented HDLC as found on HSSI interfaces.  The PA1000 serves two purposes: - it enables connection between a Packet over Sonet (POS) based router and a HSSI based router
- it enables a Packet over Sonet based router to be connected to a satellite modem and to operate at data rates below 155 Mbps
The PA1000 provides a solution for satellite operators wishing to use high performance Packet over Sonet (POS) based routers without the need to use valuable chassis slots for low speed HSSI serial interfaces. In addition, the PA1000 supports non-standard data rates and asymmetric operation, thus providing a flexible solution for the user. The PA1000 rate-adapts by stripping flags out of the data stream and transporting only the actual packet data. It is transparent to packet payload and may operate with any protocol that both the Packet over Sonet (POS) and HSSI devices support, such as PPP and Frame Relay. The PA1000 provides the system integrator with a simple, convenient and economic solution for the interconnection of modern high speed routers fitted with Packet over Sonet (POS) interfaces and older legacy routers with HSSI interfaces. Product Features - Variable bit-rate for Packet over Sonet (POS) routers
- Connect Packet Over Sonet (POS) core networks to legacy HSSI routers
- Router to satellite connections at up to 90 Mbps HSSI
- Asymmetric data rates: future-proofed satellite bandwidth
- Hardware - based Packet rate and Interface adapter
- Ease of migration for ISPs to develop Packet over Sonet (POS) router core within existing HSSI structure
Application Diagram  Specifications | Interface Type | HSSI | | Connector | 50 way miniture AMP (SCSI-2) | | Mode | DCE - DTE | | Date Rate | DCE mode: 51.84 Mbps DTE mode: up to 90 Mbps | | Framing mode | HDLC (bit mode) | | Max packet Size | 4096 bytes | | Flags | Supports back to back frames with 1 tag between frames | | Type | Modem, 1U high without feet | | | | Rackmount | 202 x 132 x 44 (without feet) | | Desktop | 202 x 132 x 48 (with feet) | | AC Mains | 100-250 VAC, 50-400Hz, 100-200mA IEC connector | | -48VDC | -36 to -72 VDC, 200-100mA | | | Interface Type | Fibre | | Connector | Duplex SC | | Fibre Types | Multimode (MM) Singlemode Short Haul (SM SH) Singlemode Long Haul (SM LH) | | Date Rate | 155 Mbits per G.957 | | Framing | STM-1/OC-3 | | Payload | HDLC (byte type) | | Max Packet Size | 4096 bytes | | Flags | Supports back to back frames with 1 tag between frames | | Safety | EN41003, EN60950 | | EMC | EN55022, EN50082 | | Temp | 0 - 45 deg C | | Humidity | 95% RH, non-condensing | | Pressure | 86-106 KPA | | Ordering Information | | | | | Multimode POS to HSSI | 80-05-530 | 80-21-530 | | Singlemode Short Haul POS to HSSI | 80-05-531 | 80-21-531 | | Singlemode Long Haul POS to HSSI | 80-05-532 | 80-21-532 |
|