This module transports ATM cells over the EIA530 serial interface on a crypto or serial satellite modem. It can be fitted into the slot on any of the Chassis in the APSAT Range. These include: - AP3000 - 3 Slot Chassi
- AP4000- 4 Slot Chassis
- AP4000L - 5 Slot Chassis
- AP8000 - 8 Slot Chassis
- AP8000L -9 Slot Chassis
The APX EIA-530 ATM Interface Module is a member of the APX Universal Interface Module range. The EIA-530 ATM Module has been designed primarily to interface to Satellite Modems to provide a flexible bandwidth ATM service across a satellite link. The APX EIA-530 ATM Module provides a single ATM interface port, configured as EIA-530 DTE allowing direct connection to a Satellite Modem. LED's are provided to indicate that real traffic is passing across the ATM interface. The EIA-530 ATM Module is "Hot Swappable" to ease maintenance with replacement modules recovering immediately without further configuration. The EIA-530 ATM module performs physical layer and ATM layer functions including framing, alarm processing and cell delineation. Flexible clock options remove network synchronisation problems. Statistics are gathered at all layers and loopbacks are available to aid diagnostic functions. OAM Alarm and Loop back functions are supported as per UNI 3.1 Management and configuration of the ATM Module is achieved via the simple menu driven user interface and may be monitored using SNMP Traps. | | Up to 20M (Max) | | DB-25 Male | | G.832 | | Loop (DCE supplies clocking) | | RTS, CTS, DCE Ready, DTE Ready, RLSD | | LOS, LOF, AIS, RAI | | G.804 | | Variable up to 46554 @ 20M | | LOC, OAM-AIS, OAM-RDI | | ITU I.610 OAM | | 2 RFC-1213, RFC-1215, EN60950, EN55022, EN50082 | | 0-40C, 0-95% RH Non condensing 86-106Kpa |
|
