FC1100 E1 Single Mode Short Haul SC Fiber Optic Modem

Visit our Main Site

Partner Login

Featured Clients

The FC1100 model provide a new level of price/ performance for extending an E1 G.703 signal over a pair of single mode short haul fibres. The FC1100 will extend both voice (PBX) and data (Router at G.703 or via an X.21/EIA530 interface converter) over several kilometres.

E1 G.703 (BNC/RJ45) to Fibre Converter : FC1X00 image

The FC1100 model provides a singlemode fibre interface using SC connectors. The E1 interface uses either a pair of BNC connectors or a single RJ45 connector. The FC1100 provides a clear channel or unchannelised E1 path over the fibre. This means that the signal can be either framed or unframed.

Product Features

Must be used in pairs.
Quad option available - 4 FC's in 1U box
Low cost E1 fibre extender
BNC and RJ45 switch selectable E1 connections
External Alarm relay port
Minimal configuration of unit needed
Compact unit & integral power supply
Rack mounting kits for 2 or 18 units available

Product Images

Specifications

Singlemode Short Haul Line interface

Line E1 Electrical Interface

Interface	Dual SC singlemode 8/125um
Tx Power	-8 dBm to -15 dBm
Max Rx input power	-8 dBm
Rx Sensitivity	-8 to -31 dBm
Optical loss budget	-15 -(-30) = 16dB

Port	G.703, 75 ohm unbalanced 120 ohm balanced
Interface	BNC (75 ohm) RJ45 (120 ohm)
Line coding	HDB3
Bit rate	2.048 Mbps +/- 50 ppm
Barrier	Fully barriered per EN41003
Cable Lengths	RG59 = 600m UR202 = 750m

Singlemode Long Haul Line Interface

Compliance & Approvals

Interface	Dual SC singlemode 8/125 um
Tx Power	0 dBm to -5 dBm
Max Rx input power	-8 dBm (may need attenuator)
Rx Sensitivity	-8 to -34 dBm
Optical loss budget	-5 -(-34) = 29 dB

Performance	PD7024 (NTR4)
Safety	EN41003, EN60950
EMC	EN55022, EN50082
Environment
Temp	0 - 45 deg C
Humidity	0 -95% RH, non-condensing
Pressure	86 - 106 KPa

Multimode Fiber Interface

Power Supply

Interface	Dual SC multimode 62.5/125 um
Tx Power	-14 to -19 dBm
Max Rx input power	-14 dBm
Rx Sensitivity	-14 to -30 dBm
Optical loss budget	-19 -(-30) = 11 dB

AC Mains	100-250 VAC, 50-400Hz, 60mA to 25mA, IEC connector
DC Supply	-40 to -72 VDC, 200 to 100mA
Power Consumption	6 watts approx when operating

Packaging
Type	Modem, 1U high without feet
Dimensions (W x D x H mm)
Rackmount	202 x 132 x 44 (without feet)
Tabletop	202 x 132 x 48 (with feet)

Ordering Information

Model	Interface	AC Mains: 100 - 250 VAC	DC Power: -48 VDC
FC1000	Multimode to E1	80-05-910	80-21-910
FC1100	Singlemode Short Haul to E1	80-05-918	80-21-918
FC1200	Singlemode Long Haul to E1	80-05-919	80-21-919
2 Unit Rackmount		80-05-256	80-05-256
18 Unit Rackmount		80-05-255	80-05-250
Quad 1U FC1000		80-405-910	80-421-910
Quad 1U FC1100		80-405-918	80-421-918
Quad 1U FC1200		80-405-919

< Prev		Next >

[ Back ]

Contact Metrodata

Metrodata
United Kingdom
+44.1784.744.700
Fax: +44.1784.744.730
This email address is being protected from spam bots, you need Javascript enabled to view it